We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Wells Lamont Ski Gloves: How to Choose the Right Pair for Rocky Mountain Days

Wells Lamont ski gloves explained: how to pick the right warmth, fit and palm material for cold Colorado, Utah and Montana days on the slopes.

Updated November 2026

Wells Lamont ski gloves are a practical choice for skiers who want dependable hand protection without overthinking the purchase. This guide shows you how to match a Wells Lamont glove to the conditions you will face in Colorado, Utah or Montana, how to check the fit, and what to look for before you buy. By the end, you will know which features matter for cold-altitude skiing and which ones you can skip.

Start With the Conditions You Will Ski In

Rocky Mountain resorts often sit above 8,000 feet, where temperatures can drop well below freezing and wind chill makes a mild morning feel much colder on the lifts. Before comparing gloves, sort your typical days into three rough groups: cold and dry, cold and windy, and wet spring snow. A glove that works for dry powder may not hold up when the snow turns heavy and wet.

Shopping for one? See our guide: 6 Best Dryguy Force Dry DX Boot and Glove Dryer Options for Ski Boots (2026).

For cold, dry days, prioritize insulation. For windy days, look for a tight cuff and a wind-resistant outer shell. For wet snow, a water-resistant face fabric and a grippy palm will serve you better than maximum loft.

Check the Fit and Warmth Features

Fit matters more than most skiers expect. A glove that is too tight restricts blood flow and makes fingers colder, while one that is too loose bunches inside the pole straps and wears out faster. Try gloves on with the liner or base layer you actually plan to wear.

  1. Make a fist and spread your fingers. The fabric should stretch without pulling at the seams.
  2. Check that fingertips reach the end of the glove without curling.
  3. Hold a ski pole grip and confirm the wrist strap or cuff sits comfortably over your jacket sleeve.
  4. Wear the gloves for ten minutes indoors. Pressure points or a damp feeling inside the glove are signs of a poor match.

Compare Insulation, Palm Material and Cuff Design

Manufacturers typically describe Wells Lamont ski gloves using terms such as insulated, water-resistant or leather palm, so read the spec sheet for each model rather than assuming all versions share the same features. The table below summarizes what each feature does for you on the mountain.

Feature What it does Best for
Synthetic insulation Retains warmth when damp Variable or wet snow
Leather palm Abrasion resistance and grip on poles Frequent pole use, rental-style hard use
Long cuff Blocks snow from entering over the sleeve Deep powder and windy lifts
Water-resistant shell Slows moisture soaking in Spring and maritime snow

Owners often report that synthetic-insulated gloves feel warmer during long runs when hands sweat, because the fill keeps some loft even when slightly damp. Keep that in mind if you tend to run hot.

Plan for Drying and Care

Wet gloves are the most common reason hands get cold by the afternoon. Each evening, remove the liners and let the gloves air dry away from direct heat. For faster drying, a dedicated ski glove dryer or a boot dryer with a glove attachment works well, and you can read about safe use in our guide to Boot & Glove Dryer Guide: How to Dry Ski Boots and Gloves Fast (2026). Avoid placing gloves close to open flames or hot radiators, since high heat can warp leather and degrade adhesives.

Common Mistakes

  • Buying a size based on everyday gloves rather than trying them on with ski layers.
  • Ignoring the cuff, which lets snow in during falls and wind-blown days.
  • Packing only one pair for a week-long trip. Bring a spare so you always have dry gloves.
  • Storing damp gloves in a closed bag overnight, which encourages odor and stiffness.
  • Choosing maximum insulation for mild spring conditions, leading to sweaty hands.
  • Ski glove liners add a thin layer that wicks sweat and keeps the outer glove cleaner. View on Amazon
  • Ski glove drying accessory speeds drying overnight so gloves are ready by morning. View on Amazon

FAQ

Are Wells Lamont ski gloves suitable for very cold Rocky Mountain days?

Many insulated models are designed for cold conditions, but warmth depends on the specific glove and what you wear underneath. Check each model’s listed features and pair with liners for extra protection on the coldest days.

How should I size Wells Lamont ski gloves?

Try them on with your ski liners and measure your hand against the manufacturer’s size chart. Fingertips should reach the glove end without the fabric bunching when you make a fist.

How do I dry ski gloves overnight?

Remove liners, open the gloves fully and keep them away from direct heat. A purpose-built glove dryer is the most reliable option for drying them quickly and safely.

Conclusion

Choose Wells Lamont ski gloves by matching insulation, palm material and cuff design to the snow and wind you expect. Confirm the fit with your actual ski layers, and pack a spare pair so you are never skiing in damp gloves. Consult a qualified professional if you have circulation or cold-sensitivity concerns before spending long days outdoors.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our rocky mountain ski trips guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Skiing The Rockies.